top of page

Measuring Guide

 

 

 

Measuring Tips For Drapery Panels

 

 

The finished length is the actual length of the finished panels. To measure for the finished length of your custom drapery panels, simply measure from the floor to the desired height from where you want the panels to hang. A good rule of thumb is: If the space above your window is 8" or less, it is usually more aesthetically pleasing to hang your panels right at the ceiling.

If the height is more than 8" then you can determine how high above the window you would like to hang the panels. Please note if you have low ceilings hanging the panels closer to the ceiling gives the illusion of more height. One more thing to keep in mind is the hardware you will be using to hang your panels. The hardware will add approximately 1"-2" to the overall length when hung. If you desire some puddling in your drapery panels, you can add 2-3" for a trouser break look or 6-8" for a formal puddled look. The extra inches must be included in your finished length. 

 

 

 

A=Rod (Width of windows plus 8")

B=Drapery finished length (From bottom of rod to floor

Here is an helpful article from our blog on How To Hang Drapery Panels. 

 

 

Measuring For Inside Mount Roman Shades

Roman shade is installed inside a recessed window

A=Exact width of window opening

B=Exact height of window opening

 

We make all the necessary deductions to make sure your roman shades fit snugly

Measuring For Outside Mount Roman Shades

The roman shade is mounted outside of the window frame

A=Exact width of roman shades

B=Exact height of roman shade

Measuring For Valances

A=Desired width of valance

B=Desired length of valance

Typically the width of the valance is the width of the window plus 6". The height is usually 18-25" but this will depend on the height of your window

Measuring A Room For Furniture Layout

When measuring a room, start with the general width and depth of the room. Then measure each piece of wall leading up to a window, door, or doorway. Measure the width of windows and doorways, as well as fireplace. 

 

Next measure the overall height of the room, then measure the window walls as shown below

Barstool Guide

bottom of page